Toshiba e-STUDIO3511 Operator's Manual page 208

12.ERROR CODE (Cont.)
Error Code
1C62
1C63
1C64
1C65
1C66
1C67
1C68
1C69
9
1C6A
1C6B
1C6C
1C6D
206
9.JOB STATUS
Cause
Memory acquiring failure
Terminal IP address unset
Terminal mail address unset
SMTP address unset
Server time time-out error
NIC time time-out error
NIC access error
SMTP server connection error
HOST NAME error
Terminal mail address error
Destination mail address error
System error
Corrective Action
Turn the power OFF and then back ON.
Perform the job in error again. If the error still
occurs, contact your authorized dealer for
support.
Ask your administrator to set the IP address
of the equipment.
Ask your administrator to set the E-mail
address of the equipment.
Ask your administrator to set the SMTP
server address.
Check if the SMTP server is operating
properly.
Turn the power OFF and then back ON.
Perform the job in error again. If the error still
occurs, contact your authorized dealer for
support.
Turn the power OFF and then back ON.
Perform the job in error again. If the error still
occurs, contact your authorized dealer for
support.
Ask your administrator to set the login name
or password of SMTP server and perform the
job again. Check if the SMTP server is
operating properly.
Ask your administrator to check if there is an
illegal character in the device name. Delete
the illegal character and reset the appropriate
device name.
Ask your administrator to check if there is an
illegal character in the E-mail address of the
equipment. Delete the illegal character and
reset the appropriate E-mail address, then
perform the job again.
Check if there is an illegal character in the
Destination E-mail address. Delete the illegal
character and reset the appropriate
Destination E-mail address, then perform the
job again.
Turn the power OFF and then back ON.
Perform the job in error again. If the error still
occurs, contact your authorized dealer for
support.