Creating A Bookbinding Margin - Toshiba e-STUDIO3511 Operator's Manual

5 Adjust the width of binding margin, and
then press the [ENTER] button.
- The default width of the margin is 7 mm.
- To adjust the width, press the [0mm] or [30mm] button to select
the desired number, and then press the [ENTER] button.
- In duplex copying, margins on the back are created on the other
side of those in the front.
"5.DUPLEX COPYING"
Select other copy modes as required.
6 Press the [START] button.

Creating a Bookbinding Margin

When Book Margin is selected, use it in conjunction with the Duplex Copying mode from book-type originals
("5. Book-type Originals -> 2-Sided Copies"
PAGE" Page 111).
Acceptable paper sizes for this function are A4, B5 and LT only.
Press the [EDIT] button to enter the edit
1
menu, and then press the [IMAGE SHIFT]
button.
2 Press the [BOOK] button.
Page 87
Page 91) or the Dual-Page mode (2-sided) ("4.DUAL-
5
107