Toshiba e-STUDIO3511 Operator's Manual page 209

Error Code
1C70 SMTP client OFF
1C80 Internet Fax transmission failure when
processing E-mail job received
1C81 Onramp Gateway transmission failure
1C82 Internet Fax transmission failure when
processing Fax job received
1CC1 Power failure
Scan Job
Error Code
SCAN TO E-MAIL
2C10, 2C12, Illegal Job status
2C13,
2C20-2C22
2C11, 2C62 Not enough memory
2C14 Invalid parameter specified
2C15 Message size exceeded limit or
maximum size
2C30 Failed to create directory
2C31, 2C33 Failed to create file
2C32 Failed to delete file
2C40 Failed to convert image file format
2C61 Failed to read AddressBook
2C63, 2C64 Invalid Domain Address
2C65, 2C66, Failed to connect to SMTP server
2C69
Cause
Message
Corrective Action
Ask your administrator to enable the SMTP
Client and perform the job again.
Confirm the "Received Internet Fax Forward"
settings.
Confirm the mail box settings.
Confirm the "Received Fax Forward" setting.
Check if the power cable is connected
properly and it is inserted securely. Check if
the power voltage is unstable.
Corrective Action
A system error has occurred during sending
an E-mail. Retry it.
Make sure there is enough memory to send
the scan job.
Make sure you specify the settings correctly
and try again.
You are sending too many documents at a
time. Send your documents separately.
Retry the scan. The system could not send
the scan job.
Retry the scan. The system could not send
the scan job.
Retry the scan. The system could not send
the scan job.
Retry the scan. The system could not send
the scan job.
Retry the scan. The system could not send
the scan job.
Make sure you are sending to right E-mail
address and retry the scan.
Make sure the SMTP server is correctly
working, or the SMTP server address has
been set correctly. Then retry the scan.
9
207