Toshiba e-STUDIO3511 Operator's Manual page 282

7.REMOVING JAMMED STAPLES (OPTIONAL) (Cont.)
5 Return the staple cover to its original
position while holding the knob.
Return the staple cartridge to its original
6
position.
- Insert the cartridge until it is caught by the latch and fixed with a
click sound.
7 Install the finisher to the equipment.
Be careful not to let your fingers be caught between the equipment
and the finisher (optional).
This could injure you.
12
280
12.WHEN THE GRAPHIC SYMBOLS BLINK ON THE TOUCH PANEL