In The Continuous Feed Mode - Toshiba e-STUDIO3511 Operator's Manual

2.SETTING ORIGINALS (Cont.)
If the scanning area and guide area are dirty, it may cause black streaks, etc. on the printed paper. Cleaning
them preferably once a week is recommended. See "Weekly Maintenance"
2

In the Continuous Feed Mode

* See "Continuous Feed Mode"
* To set originals with the different size, see "Mixed-sized Originals"
After aligning the edges of originals, place
1
the originals face up and align the slides
to their width.
- Align the originals in order from the top because they will be fed
from the top.
- One original sheet is also acceptable.
- Maximum number of sheets (all sizes) that can be set in the
reversing automatic document feeder:100 sheets (50-80 g/m
less than 16 mm in height.
- To set the mixed-sized originals, see "Mixed-sized Originals"
Page 70.
- Use the original stopper as required.
When the number of originals is too large to be set at one time, you
can divide the originals into several sets and set them one after
another. To do so, place the first set of originals first and press the
[CONTINUE] button while the scanning is in progress. After they
have been scanned, place the next set of originals.
50
2.HOW TO MAKE COPIES
Page 133
Page 284
Page 70
2
) or