Installing The Elastomer - Invacare Top End Crossfire T7A User Manual

2. Remove the threaded bushing and mounting screw securing the suspension fork top to the elastomer and the suspension fork bottom. DO NOT
use excessive force.
3. If replacing the elastomer, discard the existing elastomer.

Installing the Elastomer


Make sure the elastomer sits in the two recessed areas on the fork.
1. Position the new elastomer between the suspension fork top and suspension fork bottom.
2. Align the mounting holes in the suspension fork top and suspension
fork bottom.
3. Using the threaded bushing and mounting screw, secure the
suspension fork top and suspension fork bottom. DO NOT use
excessive force.
WARNING
Use Loctite 242 when reinstalling the mounting
screw into the threaded bushing. Otherwise the
fork can become disassembled. Possible injury or
damage could result.
4. Apply Loctite 242 to the mounting screw.
5. Reinstall the mounting screw into the threaded bushing and tighten
securely.
Part No 1167484
Locknut
Elastomer
Mounting
Screw
FIGURE 20 Removing/Installing the Elastomers (Suspension Forks
83
11 WHEELS
Suspension Fork Top
Threaded Bushing
Suspension Fork
Bottom
Caster
Only)
®
Invacare Crossfire™T7A Wheelchair
Mounting
Screw