Invacare Top End Crossfire T7A User Manual page 35

5. Remove the rear seat upholstery mounting screw and short
mounting screw (FIGURE 2).
6. Remove the back stop insert from seat rail (FIGURE 2).
7. Perform STEP 5-6 on remaining back stop insert.
8. Secure the back stop insert weldment to the armrest socket, in the
orientation shown, with two mounting screws, four washers, and
two locknuts. Tighten securely (FIGURE 3).
9. Perform STEP 8 for remaining back stop insert weldment/armrest
socket.
Right Side Armrest Socket
Washers
Mounting
Screws
Part No 1167484
Locknut
Back Stop Insert
Weldment
Washers
Armrest
Socket
FIGURE 3 Assemble Back Stop Insert and Arm Socket
Short
Mounting
Screw
FIGURE 2
Armrest
Locknut
Socket
Washers
35
Rear Seat Upholstery
Mounting Screw
Remove Back Stop Insert
Mounting Screws
Washers
Back Stop Insert Weldment
Left Side Armrest Socket
®
Invacare Crossfire™T7A Wheelchair
7 ARMS