Table of Contents
Advertisement
Detail "A"
9.2
Seat Angle Adjustment
The seat angle can be changed by raising or lowering the rear of the seat frame relative to the side frame.
1.
Fold the back. Refer to Unfolding/Folding the Back on page 41.
2.
Flip wheelchair upside down.
3.
Loosen, but DO NOT remove, the two mounting screws that secure the front of the seat frame to the side frame.
4.
On the top of each crescent link, remove the locknut and washer from the mounting screw.
5.
On the bottom of each crescent link, remove the locknut and washer from the mounting screw.
6.
Adjust seat angle by performing one of the following:
•
Moving top mounting screws to a new adjustment hole in each crescent link.
Part No 1167484
Fastening Strips located in
between the back
upholstery cover and the
seat upholstery
Seat Upholstery
FIGURE 1 Replacing Seat Upholstery
57
Seat
Upholstery
®
Invacare
Crossfire™T7A Wheelchair
9 SEAT
Advertisement
Table of Contents
