Table of Contents
Advertisement
6 Footrest
WARNING
After any adjustments, repair or service and before use, make sure all attaching hardware is tightened securely - otherwise
injury or damage may occur.
ALWAYS perform this procedure in the presence of an assistant. The position of the footrest, camber tube, seat angle,
back angle, the tautness of the back upholstery as well as the user's condition are directly related to the wheelchairs
stability. Any change to one or any combination of the five may cause the wheelchair to decrease in stability. Use EXTREME
caution when using a new seating position. The addition of anti-tippers may be required.
Check ALL allen screws that secure the footrest/raised footrest system to the wheelchair frame to make sure they are
securely tightened BEFORE using the wheelchair. ESPECIALLY if engaging in ANY contact sport.
The footrest assembly MUST be at least 1¾-inches above the ground/floor to avoid hitting protruding objects when using
this wheelchair.
6.1
Adjusting/Replacing Standard Footrest
1.
Loosen the allen screw of the two clamps that secure the footrest
to the wheelchair frame.
Replacing the Footrest
1.
Remove existing footrest.
2.
Install new footrest.
Part No 1167484
Clamps (Allen Screws)
Footrest
FIGURE 1
Adjusting/Replacing Standard Footrest
31
6 FOOTREST
Wheelchair
Frame
®
Invacare
Crossfire™T7A Wheelchair
Advertisement
Table of Contents
