Invacare Top End Crossfire T7A User Manual page 71

4. Align the desired mounting positions of the camber tube clamps with the opening of the camber tube supports.
CAUTION
Ensure one empty mounting position remains between the two socket screws, otherwise damage to the wheelchair may
occur.
5. Install the four socket screws and washers into the desired mounting positions of both camber tube clamps. Hand tighten.
 Ensure that both camber tube clamps are adjust to the same position in the camber tube support. This will ensure that the camber
tube remains at 90° to each side frame.
6. Slide the camber tube forward or backward to adjust the wheelbase length to the desired position. Securely tighten the four socket screws.
7. Install the rear wheels. Refer to Removing/Installing Rear Wheels on page 62.
Camber Tube
Support
Washers
Socket Screws
Camber Tube Clamp
Part No 1167484
Camber Tube
FIGURE 10 Reversing the Camber Tube Clamp Direction
71
Camber Tube Direction
Facing Rear of Wheelchair
Camber Tube
Facing Front of Wheelchair
Invacare
11 WHEELS
Camber Tube
Clamps
Camber Tube
®
Crossfire™T7A Wheelchair