Installing An Hp Procurve 3500Yl Series In A Rack - HP Cluster Platform Interconnects v2010 Manual

The following lists corresponds to the callouts shown in
1. Module Power and Fault LEDs
2. Extractor Handles
3. Retaining screw (2)
4. Copper CX4 port connections
5. X2 slot port cover
6. Link and Activity LEDs (one pair per port)
The yl module is installed in the rear of the ProCurve 3500yl switches. Refer to the ProCurve
Switch yl Module Installation Guide for more information on how to install, remove, and configure
the ProCurve Switch 10-GbE yl Module.

4.5 Installing an HP ProCurve 3500yl Series in a Rack

The HP ProCurve 3500yl-24G-PWR and HP ProCurve 3500yl-48G-PWR are shipped integrated
in the rack using a rail kit as described in
procedures described in the ProCurve Series 3500yl and 6200yl Switches Installation and Getting
Started Guide and the HP Cluster Platform ProCurve 1U Rack Mount Bracket Installation Guide.
Figure
Section 6.6 (page 53). Also refer to the installation
4.5 Installing an HP ProCurve 3500yl Series in a Rack
4-6.
33