Hp Procurve 2800 Series; Hp Procurve 2824 Overview; Hp Procurve 2824 Front View - HP Cluster Platform Interconnects v2010 Manual
Gigabit ethernet interconnect guide
Hide thumbs
Also See for Cluster Platform Interconnects v2010:
- User manual (140 pages) ,
- Overview (130 pages) ,
- Manual (42 pages)
Table of Contents
Advertisement
3 HP ProCurve 2800 Series
The HP ProCurve 2824 and HP ProCurve 2848 are used in HP Cluster Platform solutions. The
ProCurve 2824 has twenty 10/100/1000 ports and four dual-personality ports for 10/100/1000 or
mini-GBIC connectivity. The ProCurve 2848 has forty four 10/100/1000 ports and four
dual-personality ports for 10/100/1000 or mini-GBIC connectivity. The HP ProCurve 2800 series
is used for multiple roles in HP Cluster Platform solutions. They are used as system interconnects
and can also be used to control the console network or the administration network. This chapter
presents the following information relating to the HP ProCurve 2824, and the HP ProCurve 2848
switches:
•
An overview of the HP ProCurve 2824
•
An overview of the HP ProCurve 2848
•
A description of the LEDs and buttons found on the HP ProCurve 2824 and HP ProCurve
2848 switches
3.1 HP ProCurve 2824 Overview
The HP ProCurve 2824 is a multi-port Gigabit switch that can be connected to an external
redundant power supply (RPS) unit. Characteristics of the HP ProCurve 2824 include the
following:
•
24 auto-sensing 10/100/1000Base-T RJ-45 ports
•
Dual-personality ports - 10/100/1000Base-T RJ-45 ports or mini-GBIC slots for optional
fiber–optic connectivity such as Gigabit-SX, -LX, or –LH
•
Plug-and-play networking
•
Automatic learning of the network addresses
•
Support for the Spanning Tree Protocol to eliminate network loops
•
48 Gbps backplane with up to 35.7 mpps
•
Stacking capability: single IP address management for a virtual stack of up to 16 switches
•
Port security to prevent unauthorized access using MAC address lockdown
3.1.1 HP ProCurve 2824 Front View
Figure 3-1
shows the front view of the ProCurve 2824.
Figure 3-1 HP ProCurve 2824 Front View
1
4
5
The following list corresponds to the callouts shown in
1.
Power and Fault LEDs
2.
Test, Fan, and RPS status LEDs
3.
Switch port LEDs
4.
Console port
5.
Reset and Clear buttons
(Section
3.1.1).
2
6
(Section
3.1).
(Section
3.2).
3
7
Figure
8
3-1.
3.1 HP ProCurve 2824 Overview
23
Advertisement
Table of Contents
