Procurve 9304M; Procurve 9304M (4-Slot) - HP Cluster Platform Interconnects v2010 Manual

• Next-generation Spanning Tree functionality
• Optional redundant power supply
• Hot-swappable chassis modules
• Automatic routing switch failover
• Command line interface
• Web interface
Figure 8-1 through
The rear panel of a chassis does not provide network or power connections and is not shown.
The power supplies are accessible from the front of the chassis, and the power supply connector
is embedded within the power supply. The green LED on the power supply is lit when the power
supply is properly supplying power to the system.

8.1.1 ProCurve 9304M

The ProCurve 9304M
Ethernet ports, 144 auto-sensing 10/100 ports, or a combination. Slots are numbered 1 – 4, from
top to bottom. The slot numbers are absolute and do not change based on the position of the
management module. The ProCurve 9304M is used as a system interconnect for HP Cluster
Platform solutions with up to 56 nodes. The nodes connect directly to the ProCurve 9308M in a
star configuration.
Figure 8-1 ProCurve 9304M (4–slot)
1
11
The following list corresponds to the callouts shown in
1. 10BaseT/100BaseTX ports
2. 1000BaseSX or 1000BaseLX ports
3. Port LEDs
4. Power LEDs
5. Serial port
6. Reset button
7. Port LEDs
58 HP ProCurve 9300 Series
Figure 8-3 show the front panels of the ProCurve 9304M, 9308M, and 9315M.
(Figure 8-1) has 4 open module slots for up to 6 10 GbE ports, 56 Gigabit
2 3
1 2 3 4
Link Link
Activity Activity
1 2 3 4
Link Link
Activity Activity
1 2 3 4
Link Link
Activity Activity
1 2 3 4 5 6 7 8 9 10 11
4
5 6 8
7
Link Link
Pwr
Activity Activity
5 6 8
7
Link Link
Activity Activity
5 6 7 8
Link Link
Activity Activity
12 13 14 15 16 17 18 19 20 21 22
10
Figure
5 6
7
23 24
8
9
8-1.