5 HP ProCurve 5308xl
The HP ProCurve 5308xl is supported as a system interconnect in HP Cluster Platform Gigabit
Ethernet solutions. It is a multi-port modular interconnect that provides low latency for high-speed
networking. This chapter presents the following information relating to the HP ProCurve 5308xl:
•
A description, including an explanation of the features
•
A description of the xl switch module
•
Instructions for installing an xl switch module
•
Instructions for installing a second power supply
•
Instructions for installing the ProCurve 5308xl in a rack
Refer to the following documents for more detailed information about this switch:
•
HP ProCurve Series 5300xl Switches Installation and Getting Started Guide
•
HP ProCurve Switch xl Modules Installation Guide
•
HP ProCurve Series 5300xl Switches Management and Configuration Guide
•
HP ProCurve Series 5300xl Switches Access Security Guide
•
HP ProCurve Series 5300xl Switches Advanced Traffic Management Guide
•
HP ProCurve Redundant Power Supply Installation Guide
•
HP ProCurve Manager for Hubs & Switches
5.1 ProCurve 5308xl Features
The ProCurve 5308xl is available as an open 8-slot chassis
several available interfaces (console, web browser, HP OpenView, and an SNMP-based graphical
interface).
Figure 5-1 ProCurve 5308 Chassis
1
The following list corresponds to the callouts shown in
1.
Power and fault LEDs
2.
Console port
34
HP ProCurve 5308xl
2
3
4
(Section
(Section
5.2)
(Section
5.3)
(Section
(Figure
5
6
Figure
5.1)
5.5)
(Section
5.6)
5-1). It is managed through
5-1: