Yamaha YZ450F(W) Owner's Service Manual page 558

SWINGARM
8. Install:
• Bolt (connecting rod) 1
• Plain washer 2
• Nut (connecting rod) 3
NOTE:
• Apply the molybdenum disulfide grease on
the bolt.
• Do not tighten the nut yet.
9. Install:
• Bolt (rear shock absorber-relay arm) 1
• Nut (rear shock absorber-relay arm) 2
NOTE:
Apply the molybdenum disulfide grease on the
bolt.
10. Tighten:
• Nut (connecting rod) 1
11. Tighten:
• Nut (relay arm) 1
12. Install:
• Cap 1
NOTE:
Install the cap (right) with its mark a facing
forward.
5 - 60
CHAS
53 Nm (5.3 m · kg, 38 ft · lb)
80 Nm (8.0 m · kg, 58 ft · lb)
70 Nm (7.0 m · kg, 50 ft · lb)