Front Wheel Assembly And Installation - Yamaha YZ450F(W) Owner's Service Manual

Table of Contents

Advertisement

FRONT WHEEL AND REAR WHEEL
5 - 5
EC595000
ASSEMBLY AND INSTALLATION
Front wheel
1. Install:
• Bearing (left) 1
• Spacer 2
• Bearing (right) 3
• Oil seal 4
New
NOTE:
• Apply the lithium soap base grease on the
bearing and oil seal lip when installing.
• Use a socket that matches the outside diam-
eter of the race of the bearing.
• Left side of bearing shall be installed first.
• Install the oil seal with its manufacture's
marks or numbers facing outward.
CAUTION:
Do not strike the inner race of the bearing.
Contact should be made only with the outer
race.
2. Install:
• Brake disc 1
• Bolt (brake disc) 2
NOTE:
Tighten the bolts in stage, using a crisscross
pattern.
3. Install:
• Collar 1
NOTE:
• Apply the lithium soap base grease on the oil
seal lip.
• Install the collars with their projections a
facing the wheel.
4. Install:
• Wheel
NOTE:
Install the brake disc 1 between the brake
pads 2 correctly.
CHAS
12 Nm (1.2 m · kg, 8.7 ft · lb)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Yz450f 2007Yz450f w 2007Yz450f 2006Yz450fw 2006

Table of Contents