Accessing the Setup dialog box
From the Main dialog box
Managing routine tasks for servers
Changing the display behavior
From the Menu dialog box
HPE G3 KVM Console Switch connection mode, and a time to delay display of the OSD after pressing the
Print Scrn key can be changed. The display order setting alters how servers display in several screens,
including the Main, Devices, and Broadcast dialog boxes.
("Accessing the Main dialog
Changes the server listing between a numerical listing using the port or EID numbers
and an alphabetical listing using the server name. After you press Print Scrn,
changes the delay time before the Main dialog box appears.
Sets password to restrict server access. A valid password must be alphanumeric
and contain a minimum of five characters and a maximum of 15 characters.
Permitted characters are case sensitive and can consist of A–Z, 0–9, spaces and
Enables the Screen Saver mode.
Changes the display, timing, color, and location of the status flag.
Changes the OSD interface language.
Identifies device types attached to the KVM Console Switch, including servers and
other legacy console switches. Also modifies the type of legacy console switches.
Names the IA.
Changes the keyboard country code reported by the IA if queried.
Sets up custom scan patterns for up to 16 servers.
Selects the network speed, transmission mode, and configuration.
("Accessing the Menu dialog
box" on page 22), click Setup. The Setup dialog
box" on page 27), the display order of servers,
Local port operation 26