Axis 5900 User Manual page 100

100
Section 10 Management and Configuration
Network Speed
Ethernet Network
With the Network Speed parameter you can manually specify
the speed at which you will send and receive network packages.
To change the Network Speed, log in to the print server's
internal web pages and click admin | General Settings |
General. From here you have the option of setting the network
speed to:
Network Speed
AUTO_SENSE
(default value)
10_HALF__DX
10_FULL_DX
100_HALF_DX
100_FULL_DX
WLAN To change the Network Speed, log in to the print server's
internal web page and click admin | Network Settings |Detailed
View | WLAN. From here you have the option of setting the
network speed to:
Network Speed
AUTO_SENSE
(default value)
1 Mbps
2 Mbps
5.5 Mbps
11 Mbps
Note:
The default Network Speed value is AUTO_SENSE. This option is the correct option
for the majority of users. If you choose the incorrect network speed option for
your network, you may lose contact with the print server. In order to reset the
Network Speed parameter to AUTO_SENSE, you will have to perform a factory
default on the print server.
The print server detects which speed is optimal for
each network package you transfer.
10 Half Duplex
10 Full Duplex
100 Half Duplex
100 Full Duplex
The print server detects which speed is optimal for
each network package you transfer.
AXIS 5900 User's Manual