Axis 5900 User Manual page 128

128
Upgrading over the
Network using FTP
1. Click the Manage Network button in the AXIS ThinWizard main
menu.
2. Select a network group from the drop-down list. You can only
update the servers that are included in the selected network
group.
3. All AXIS servers included in the network group appear. Click the
Firmware button to start the Upgrade Wizard.
4. Follow the instructions that are presented to you to complete the
installation.
Refer to Using AXIS ThinWizard for Print Server Management,
on page 112, for more information about AXIS ThinWizard.
To upgrade over the network using FTP you will need the file
with the new print server software. The name of this file is in the
form
product_version.bin
release 6.30. You can use any of the previously mentioned
methods to obtain the new file.
You must assign the AXIS 5900 with an IP address, as described
in Assigning an IP address to the print server, on page 21, before
you can use this upgrading method.
Follow the procedures below to upgrade the AXIS 5900:
Caution
Be careful not to interrupt the file transfer. If the transfer is interrupted the AXIS
5900 may have to be re-initialized by your dealer.
1. Log in to the AXIS 5900 with the command:
ftp <host name>
2. You will be prompted for user id and password. Use the user id
, which has the default password
root
3. Type the command:
binary
to change to binary transfer mode.
, e.g.
5900_630.bin
, or
ftp <IP address>
pass
AXIS 5900 User's Manual
for software
.