Axis 5900 User Manual page 51

AXIS 5900 User's Manual
Note:
Installing
NetBIOS/NetBEUI
Printers in
Windows NT 3.5x
using AXIS Print
Monitor
10. Click the Have Disk... button. Insert the printer driver diskette/CD
that was provided with your printer, select the appropriate
diskette/CD drive and click OK.
11. Select the printer driver you want to install and click Next>.
12. Enter an appropriate name for your printer and click Next>.
13. Choose whether you want to share the printer with other
network users and click Next>.
14. Choose whether you want to produce a test page and then click
Finish.
You can share the printer drivers you have installed with other AXIS Print System
users on your network. In AXIS Print System, check the Enable Driver Sharing box
in My Printers | Settings | Program Options | General.
Install the AXIS Print Monitor software on your Windows
NT3.5x client, if you have not already done so. AXIS Print
Monitor can be downloaded from the AXIS Network Product CD
and Axis Communications web site http://www.axis.com
Follow the procedure below to install Axis printer ports from a
Windows NT 3.5x workstation:
1. Open the Print Manager and select Create Printer from the
Printer menu.
2. Enter an appropriate name in the Printer Name field.
3. Choose an appropriate printer driver for your printer from the
Manufacturers and Printer Models list displayed and then
proceed directly to step 6. Please note that it is only necessary to
perform steps 4 - 5 if your printer does not appear in the model
list.
Section 5 Setting Up - Windows
51