Axis 5900 User Manual page 49

AXIS 5900 User's Manual
Installing
NetBIOS/NetBEUI
printers in
Windows 95/98/Me
using AXIS Print
Monitor
Note:
Follow the procedures below to install Axis NetBIOS/NetBEUI
printer ports on a Windows 95/98 workstation, using AXIS Print
Monitor:
1. To start the Add Printer Wizard, select Settings - Printers from
the Start menu and double-click the Add Printer icon.
2. After clicking Next> in the first dialog, the Wizard asks you to
select Local printer or Network printer. Select Local printer as
the AXIS 5900 emulates a local printer port. Click Next>.
3. Choose the appropriate printer driver for your printer. If the
desired printer driver appears in the displayed Manufacturers and
Printer Models lists, highlight your selection, click Next> and
proceed directly to step 6. It is only necessary to perform steps 4
- 5 if your printer does not appear in the model list.
Even if the desired printer is available in the Manufacturers and Printer Models
list, you are advised to use the printer driver provided with the printer. This
assures you of the latest driver software.
4. Click the Have Disk... button. Insert the printer driver diskette/CD
that was provided with your printer, select the appropriate
diskette/CD drive and click OK.
5. Select the printer driver you want to install and click Next>.
6. Select the AXIS Printer Port from the Available Ports list. The port
names appear as <name>.LP1 and <name>.LP2, where <name>
is AX followed by the last six digits of the AXIS 5900 serial
number, e.g. AX100086 (default serial no.). Click the Configure
Port button.
7. Choose whether error condition pop-up messages are to be
displayed by checking the box in the Configure AXIS Ports
dialog. Define the frequency at which the error messages should
be displayed after retry. Click OK>.
8. Enter an appropriate name for your printer and click Next>.
Section 5 Setting Up - Windows
49