Axis 5900 User Manual page 45

AXIS 5900 User's Manual
Note:
Installing TCP/IP
printers in Windows
NT/2000
You should continue with the following steps only if you wish
to install a printer to a new TCP/IP port and have chosen
Printers@TCP/IP Port previously in step 6.
10. The printer you have defined will now be displayed in the Printers
Folder. Right-click the printer object and select Properties from
the Context menu.
11. Click the details tab within the Properties page and then click
Add Port to display the available monitors.
12. Click the radio button "other". Select AXIS Port and then click OK.
13. Select RAW (TCP/IP) as your choice of network protocol and click
OK.
14. Enter the IP address or the host name of your print server and
assign an appropriate port number. Click OK.
15. The TCP/IP port will then be added automatically to the list of
available ports. Click OK.
16. You may now configure the port, as described in step 7.
17. Click the Apply button.
The Axis Printer Port is now installed.
Even if the desired printer is available from the manufacturer and model lists, you
are advised to use the print driver provided with the printer. This assures you of
the latest driver software.
1. To start the Add Printer Wizard, select Settings - Printers from
the Start menu and double-click the Add Printer icon.
2. Windows 2000 only: Start the installation by clicking Next>.
3. The Wizard asks you to select My Computer or Network printer
server. Select My Computer, as the AXIS 5900 emulates a local
printer port.
Section 5 Setting Up - Windows
45