AXIS 5900 User's Manual
Obtaining the Software
Note:
4. Type the command:
put <software name> FLASH
where
<software name>
software, e.g.
5900_630.bin
5. Wait for the Flash loading operation to finish. This normally takes
1 to 4 minutes. The unit automatically restarts with the new
print server software.
6. Log out using the command:
or
quit, bye
exit
depending on your FTP version.
You can obtain all the print server software as well as the latest
utility software from the following locations:
• http://www.axis.com
• AXIS Network Product CD
• your local dealer
If you are upgrading your print servers using AXIS ThinWizard, you do not need to
obtain the firmware file prior to the upgrading process, provided that you are
connected to the Internet.
is the name of the new print server
129