Axis 5900 User Manual page 121

AXIS 5900 User's Manual
Viewing
the Status file
Performing resets
Telnet Help
The status command shows which printer port the logical
printers are assigned to, and their current status.
Follow the instructions below to view the status file using telnet:
1. Log in to the AXIS 5900 by typing:
telnet <host name>
windows (Windows and OS/2) or in a UNIX shell window.
2. Enter the user id and the password. (The default entries are
and .)
pass
3. View the status file by typing:
status
Three types of reset commands allow you to perform soft resets,
to perform hard resets, and to reset the print server's parameters
to its factory default settings.
Follow the instructions below to perform a soft reset using
telnet:
1. Log in to the AXIS 5900 by typing:
telnet <host name>
windows (Windows and OS/2) or in a UNIX shell window.
2. Enter the user id and the password. (The default entries are
and .)
pass
3. Restart the print server's protocols by typing:
softreset
Replace the command in step 3 above with
to perform the other two reset operations.
default
By typing in step 3 in any of the Telnet instruction sets
help
above, a list of all available commands will be displayed.
Section 10 Management and Configuration
or
telnet <IP address>
or
telnet <IP address>
hardreset
121
in a DOS
root
in a DOS
root
or