Axis 5900 User Manual page 104

104
Section 10 Management and Configuration
Adding Strings Before
and After Print Jobs
3. Set the parameter Physical Port to LPT1.
4. Set the parameter Character Set Conversion to ISO>IBM.
5. Click the OK button.
6. Select the Printer2 tab.
7. Set the parameter Physical Port to LPT1.
8. Set the parameter Character Set Conversion to DEC>IBM.
9. Click the OK button.
The ISO 8859-2 printer data that is sent to logical printer PR1
converts to IBM PC Set 2 and is printed on LPT1. Similarly, the
DEC printer data that is sent to logical printer PR2 converts to
IBM PC Set 2 and is printed on LPT1.
These string functions provide a way to send printer control
commands before and after each print job. They may be
specified individually for each logical printer.
All strings are entered as hexadecimal byte values.
Example:
Assume that the logical printer PR5 is configured as a PostScript printer and that
you want to append the PostScript End of File character (hex 04) after each print
job.
Follow the instructions below to add a string after the print job:
1. From the print server's internal web page, select Admin | Logical
Printer Settings.
2. Select the Printer5 tab.
3. Enter the string 04 in the String After Print Job text field.
4. Click the OK button.
AXIS 5900 User's Manual