Epson Stylus Pro 10600 Reference Manual page 97

HEX DUMP
Data received from the host computer can be printed out in
hexadecimal numbers.
Follow these steps to print it out.
1. Load paper into the printer.
2. In maintenance mode, press the Item button to display HEX
DUMP.
3. Press the Enter button.
The print data in the print buffer is printed with 16-byte hex.
data in the left column, and corresponding ASCII characters
in the right column.
Notes:
If the last data is less than 16 bytes, it is not printed until you press the
Pause button.
LANGUAGE
You can select the language to be displayed on the LCD panel.
Follow these steps to select a suitable language.
1. In maintenance mode, press the Item button until LANGUAGE
is displayed.
2. If you want to change the language, press the + or - button
until a suitable language is displayed.
3. Press the Enter button to set the language. Confirm that the
READY (or similar word in the language selected) is displayed
on the LCD panel.
Note:
It takes a while until READY (or similar word in the language selected)
is displayed.
-96