Epson Stylus Pro 10600 Reference Manual page 254

UNABLE TO PRINT
INK OUT
Y/LM/M/LC/C/K
NO INK CARTRIDGE
Y/LM/M/LC/C/K
WRONG CARTRIDGE
Y/LM/M/LC/C/K
OPTION I/F ERROR
SERVICE REQ
nnnnnnnn
All lights Flashing
When the Operate light does not come on and mechanism
initialization does not start (even when the Power button is
pressed to turn on the printer), try the solutions listed for the
problem.
❏ Turn off the power and make sure the power cord is securely
plugged into the printer.
If an error occurs, or
the ink compartment
cover is open, you try
to print a test pattern
(nozzle check, status
check, head
alignment, or paper
thickness pattern)
from the SelecType
settings.
Ink cartridge(s) is
(are) empty.
Ink cartridge(s) is
(are) not installed.
Wrong ink
cartridge(s) is (are)
installed.
Wrong I/F card is
installed.
A fatal error has
occurred.
After 3 seconds the
message disappears.
Press the Pause button to
exit the SelecType mode.
When an error or status
message appears again,
clear and perform
printing a test pattern
again.
Replace the ink
cartridge(s) as indicated
by the lights. See
"Replacing Ink
Cartridges".
Install ink cartridge(s) as
indicated by the lights.
See "Replacing Ink
Cartridges".
Use the correct ink
cartridge(s).
Install the correct I/F card
after turning off the
power.
Note the error number
"nnnnnnnn" and
contact your dealer. See
"Contacting Customer
Support".
-253