Epson Stylus Pro 10600 Reference Manual page 72

3 To select menu
ex) If you want to select the third menu, press this button three times.
4 To access the menu
5 To select items
ex) If you want to select the third item, press this button three times.
6 To set parameters
7 To access the item
Note:
Press the Pause button any time to return to the READY status.
1. Enter the SelecType mode
Make sure that READY is displayed on the LCD panel, then
press the SelecType button.
2. Select a menu
Press the SelecType button to select a desired menu.
To return to the READY status, press the Pause button.
3. Select an item
Press the Item button. The first item of the selected menu is
displayed. Press the Item button to select a desired item.
If the item is for execution only, press the Enter button to
execute the function for the item. After execution, the printer
exits SelecType mode and returns to the READY status.
4. Select a parameter
Press the + or - button to select a parameter for the item.
To display the next item without changing the default value,
press the Item button.
5. Set the parameter
Press the Enter button to store the selected parameter.
-71