Using Cut Sheet Media; Loading Cut Sheet Media - Epson Stylus Pro 10600 Reference Manual

Printing page lines
If you want to print continuously on roll paper first, then cut the
page yourself after you finish printing, use the Print Page Line
setting. To make the Print Page Line setting using the control
panel, see "SelecType Settings". To use the printer software, see
"Print Page Line" for Windows or "Print Page Line" for
Macintosh.

Using Cut Sheet Media

Loading cut sheet media

To load cut sheet media longer than 279 mm long edge of Letter
size), see the next section. To load paper with a length of A3, Super
A3/B, and B, see "Loading cut sheet with a length of A4/Letter,
A3/US B, and Super A3/B".
If you are printing on thick paper (0.5 to 1.6 mm), see "Printing
on thick paper (0.5 to 1.6 mm)".
Loading cut sheet media longer than 279 mm (long edge
of Letter size)
To load cut sheet media longer than 279 mm, follow the steps
below.
Caution:
c
As much as possible, keep your fingers off the printable surface of
the media, as fingerprints may reduce printout quality.
1. Make sure that the printer is on and the roll paper cover is
closed.
2. Press the Paper Source button repeatedly until the Sheet
light is on.
-204