Initialization - Epson GT-10000+ Setup Manual

Initialization

Before connecting the scanner to your PC, follow the steps below
to make sure that the scanner is operating properly.
1. Open the document cover so you can see the operation of the
scanner during initialization.
2. Turn on the scanner by pressing the OPERATE button.
3. Make sure the carriage moves towards the right slightly and
back to its original position, and the fluorescent lamp on the
carriage flash.
The READY indicator light comes on, meaning the scanner has
completed initialization.
4. Turn off the scanner.
If the scanner does not work as described, make sure the power
cord is firmly plugged in and that you have released the
transportation lock, then try again.
c
Caution:
Whenever you turn off the scanner, wait at least 10 seconds before
turning it back on. Rapidly turning the scanner on and off can
damage the scanner.
2-6
Setting up the Scanner