Flight Plan Mode - Garmin GTN 625 Pilot's Manual

14.5.2

Flight Plan Mode

The Fuel Planning Flight Plan mode shows fuel calculations between two legs
of the flight plan or the cumulative flight plan.
1. Touch the Mode key to select Flight Plan mode, if required.
Touch To Toggle
Sensor Data Use
Figure 14-33 Utility Fuel Planning Page Showing Edit Input Data (Flight Plan Mode)
2. Touch the Flight Plan key to select the flight plan.
3. Touch the Leg key to select the flight plan leg. If the
"Cumulative" selection is chosen, statistics will relate to the
entire flight plan.
4. If desired, touch the Fuel on Board key and then use the
keypad to select the Fuel on Board value and touch Enter.
5. If desired, touch the Fuel Flow key and then use the keypad
to select the Fuel Flow value and touch Enter.
6. Touch the Ground Speed key and then the keypad to select
the average ground speed for the trip and touch Enter.
190-01004-03 Rev. F
Figure 14-34 Select Flight Plan
Figure 14-35 Select Flight Plan Leg
Garmin GTN 625/635/650 Pilot's Guide
Touch To
Compute Data
And View
Statistics
Touch To Select
Flight Plan (Active
FPL Shown)
Touch To Scroll List
Touch To Select Flight
Plan Leg
Foreword
Getting
Started
Xpdr Ctrl
Com/Nav
FPL
Direct-To
Proc
Wpt Info
Map
Traffic
Terrain
Weather
Nearest
Services/
Music
Utilities
System
Messages
Symbols
Appendix
Index
14-21