Demo Mode - Garmin GTN 625 Pilot's Manual

Garmin gps
Hide thumbs Also See for GTN 625:
Table of Contents

Advertisement

18.3
Foreword
The GTN product contains a "Demo" mode that allows simulation of all
Getting
operations of the product to allow practice and familiarization while staying on
Started
the ground.
Xpdr Ctrl
WARNING: Do not use the GTN to navigate while Demo mode is active.
Do not use or enter Demo mode while airborne.
Com/Nav
FPL
Direct-To
Proc
Wpt Info
Map
Traffic
Terrain
Weather
Nearest
Services/
Music
Touch For GPS Settings
Utilities
System
Touch For NAV Settings
Messages
And Time Settings
Symbols
Appendix
Index
18-14

Demo Mode

1. Press in and hold the Direct-To key and then apply power to
the unit.
Figure 18-2 Demo Mode Start Up Display
2. Touch the Continue key and Fuel keys as normally needed to
start operations.
3. Touch the Demo key in the lower part of the display to reach
the Demo Setup functions.
Touch For Date
Figure 18-3 Demo Mode Setup
Garmin GTN 625/635/650 Pilot's Guide
Touch To Continue
190-01004-03 Rev. F

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gtn 635Gtn 650

Table of Contents