Jeppesen Databases - Garmin GTN 625 Pilot's Manual

18.2.1
Foreword
The navigation database is updated on a 28-day cycle. Navigation database
Getting
updates are provided by Garmin and may be downloaded from the Garmin web
Started
site "fly.garmin.com" onto a Garmin provided Supplemental Data card. Contact
Xpdr Ctrl Garmin at fly.garmin.com for navigation database updates and update kits. The
Navigation database is stored internally and the data card is only used to transfer
Com/Nav
the database into the unit.
FPL
NOTE: Garmin requests that the flight crew report any observed
Direct-To
discrepancies related to database information. These discrepancies could
come in the form of an incorrect procedure, incorrectly identified terrain,
Proc
obstacles and fixes, or any other displayed item used for navigation or
communication in the air or on the ground. Go to "FlyGarmin.com" and at
Wpt Info
the bottom of the page select "Aviation Data Error Report."
Map
Updating the Jeppesen navigation database
Traffic
Terrain
Weather
Nearest
Services/
Music
Utilities
System
Messages
Symbols
Appendix
Index
18-10

Jeppesen Databases

1. With the GTN 6XX System OFF, insert the SD card containing the
navigation database update into the card slot of the GTN 6XX
to be updated (label of SD card should face to the right).
2. Turn the GTN 6XX System ON.
3. Verify the correct update cycle is loaded during power-up.
Garmin GTN 625/635/650 Pilot's Guide 190-01004-03 Rev. F