Vertical Speed (Vs) Profile; Target Offset - Garmin GTN 625 Pilot's Manual

14.1.3
Foreword
This value sets the vertical speed.
Getting
Started
Xpdr Ctrl
Selected
Vertical
Com/Nav
Speed
FPL
Direct-To
Proc
Wpt Info
14.1.4
Map
The Target Offset is a pilot-selected distance value that represents the
Traffic
geographical location where you wish to arrive at the target altitude. This
distance is measured from the Target Waypoint and, in a separate data field on
Terrain
the VCALC page, designated as either before or after the Target Waypoint.
Weather
Nearest
Selected
Target
Services/
Offset
Music
Utilities
System
Messages
Symbols
Appendix
Index
14-6

Vertical Speed (VS) Profile

1. While viewing the VCALC page, touch the VS Profile key.
Figure 14-7 Select VCALC Vertical Speed
2. Use the numeric keypad to select the desired Vertical Speed
and then touch the Enter key.

Target Offset

1. While viewing the VCALC page, touch the Offset key.
Figure 14-8 Select VCALC Target Offset
2. Use the numeric keypad to select the desired Target Offset and
then touch the Enter key.
Garmin GTN 625/635/650 Pilot's Guide
Backspace
Key
Numeric
Keypad
Touch Enter Or
Press Small Knob
To Save Value
Backspace
Key
Numeric
Keypad
Touch Enter Or
Press Small Knob
To Save Number
190-01004-03 Rev. F