Graphically Edit Flight Plan Mode; Adding A Waypoint Within An Existing Flight Plan; Weather - Garmin GTN 750 Pilot's Manual

9.3.3

Graphically Edit Flight Plan Mode

The Edit Flight Plan Mode allows making quick changes to the active flight
plan directly on the display. The process is simply touching the display to start
Map Pan Mode, touching the Graphically Edit FPL key, dragging the desired
leg to a new waypoint or airway, and touching the Done key. At any point, a
step may be removed by touching the Undo key or the whole process ended by
touching the Cancel key. The Undo key will remove up to nine steps.
9.3.3.1

Adding a Waypoint Within an Existing Flight Plan

1. Touch the Map page display. The Map Mode selection keys
will appear. Touch the Graphically Edit FPL key.
2. Touch and hold the desired leg of the flight plan.
190-01007-03 Rev. B
Figure 9-31 Edit Flight Plan Mode
Figure 9-32 Select Leg of Flight Plan to Change
Garmin GTN 725/750 Pilot's Guide
Active Flight Plan
Map Pointer Where
Display Was Touched
Touch Edit Flight Plan
Key To Change FPL
Touch To Return To
The Map Display
Current Active
FPL Waypoints
Active Flight Plan Leg
Intended New Waypoint
Touch To Cancel
Changes And Return
To Map Display
Foreword
Getting
Started
Audio &
Xpdr Ctrl
Com/Nav
FPL
Direct-To
Proc
Charts
Wpt Info
Map
Traffic
Terrain

Weather

Nearest
Music
Utilities
System
Messages
Symbols
Appendix
9-29
Index