Creating (Or Editing) A Flight Plan In Pan Mode - Garmin GTN 725 Cockpit Reference Manual

Hide thumbs Also See for GTN 725:

Table of Contents

Creating (or Editing) a Flight Plan in Pan Mode

While in Pan Mode, touch the Graphically Edit FPL key to add/remove

waypoints and/or alter a course line in an existing ﬂ ight plan. You can also

enter or edit an existing ﬂ ight plan by touching the Flight Plan key on the

home page. See the Flight Plan section of this guide.

NOTE: It is not possible to graphically add an intermediate waypoint

between the current position and a direct-to waypoint unless that waypoint

is in the ﬂ ight plan. Garmin recommends deleting any ﬂ ight plan prior to

graphically editing a direct-to waypoint.

On the Map page, enter Pan Mode by touching the screen. Touch the

Graphically Edit FPL key. Touch any waypoint that you want to be part of

your ﬂ ight plan. Should you make an error, touch the Undo key. The Undo

key will reverse up to the last nine consecutive edits. When ﬁ nished, touch

the Done key to save your changes. Touch Cancel to leave the page without

making any changes to the ﬂ ight plan.

Touch to exit

page without

changes to

ﬂ ight plan.

190-01007-04 Rev. C

Edit Flight Plan

Flight Plan on Map Page

GTN 725/750 Cockpit Reference Guide (CRG)

Table of Contents