Alerts Settings; Arrival; Proximity - Garmin GTN 625 Pilot's Manual

15.5
Foreword
The Alerts Setup page controls two functions: Arrival Alerts and Airspace
Getting
Alerts. Arrival Alerts, when active, will generate a message when the aircraft
Started
is within the selected proximity of the destination. Airspace Alerts generate a
Xpdr Ctrl
message and filtering of the Nearest Airspace list. The altitude component of
Airspace Alerts are dependent on both aircraft and airspace altitude and the
Com/Nav
values set for the Altitude Buffer.
15.5.1
FPL
Direct-To
Proc
Wpt Info
Map
Traffic
Select Airspace Types
Terrain
Weather
Nearest
Services/
15.5.2
Music
Utilities
System
Messages
Symbols
Appendix
Index
15-24

Alerts Settings

Arrival

1. While viewing the Setup page under the Systems heading,
touch the Alerts key.
Arrival
Figure 15-33 Alerts Setup Page
2. Touch the Arrival key to toggle activation. A green bar will
appear when it is active.

Proximity

Touch the Proximity key to set the Destination Proximity
distance values. A numeric keypad will appear. Select the
desired values and then touch Enter.
Selected Proximity Value
Figure 15-34 Arrival Alert Proximity Selection
Garmin GTN 625/635/650 Pilot's Guide
Touch to Select
Distance Values
Touch Key to
Delete Values
Use the Numeric
Keypad to Select
Proximity Value
190-01004-03 Rev. F