Garmin GTN 625 Pilot's Manual page 468

Common Problems/Troubleshooting Tips for Databases
Foreword
• SD Cards
Getting
- The supplied SD cards, and most commercially available SD cards, have
Started
a small sliding tab located on the top left of the card (when viewing the
Xpdr Ctrl
card label-side up).
- When the sliding tab is in the Down position (as in farther away from
Com/Nav
the gold contacts on the back of the card), you will not be able to write
data to the card, as it will be write protected.
FPL
- The tab must be in the Up position to work correctly.
Direct-To
• Card Programmer
- If a card programmer is having trouble finding or writing data to
Proc
the SD cards, you may have to upgrade to a High Capacity SD card
Wpt Info
programmer.
- SD cards with a capacity of 4GB are considered high capacity.
Map
- Most non-high capacity card programmers will not work with a high
Traffic capacity SD card. High capacity card programmers can be easily
purchased at a consumer electronics store
Terrain
- Ensure that your card programmer is not plugged into a USB hub, your
computer screen, or your keyboard.
Weather
- Make sure it is plugged directly into your computer (the back of the
Nearest
computer, if using a desktop computer).
• If you accidentally place a file onto the wrong card, call Garmin' s Aviation
Services/
Music
Product Support team to look at the files and delete the proper files
- Do not format the cards
Utilities
System
Messages
Symbols
Appendix
Index
18-12
Garmin GTN 625/635/650 Pilot's Guide 190-01004-03 Rev. F