Direct-To Navigation - Garmin GTN 625 Pilot's Manual

5 DIRECT-TO
The GTN 6XX Direct-To function can quickly set a course to a nearby facility.
If the pilot selects Direct-To to a waypoint that is in the flight plan, waypoint
sequencing in the flight plan will resume upon reaching that waypoint. If the
pilot selects Direct-To for a waypoint that is not in the flight plan, the flight
plan will no longer be active but remains available. There are some fixes within
procedures for which if a Direct-To is selected then the approach will not be
active. For example, if you activate a Direct-To course to a waypoint between
the FAF and the MAP and go Direct-To to that waypoint then approach guidance
will not become active.
5.1

Direct-To Navigation

1. Press the Direct-To key on the right side of the unit.
2. Select Waypoint, FPL, or NRST APT from the Direct-To
window by touching the desired tab.
3. If a specific course is necessary, touch the Course To key.
190-01004-03 Rev. F
Figure 5-1 Direct-To Wpt Page
Garmin GTN 625/635/650 Pilot's Guide
Foreword
Getting
Started
Xpdr Ctrl
Com/Nav
FPL
Direct-To
Proc
Wpt Info
Map
Traffic
Terrain
Weather
Nearest
Services/
Music
Utilities
System
Messages
Symbols
Appendix
Index
5-1