Garmin GTN 625 Pilot's Manual page 302

11.2.2
Foreword
Routinely clearing the StormScope Page of all discharge points is a good
Getting
way to determine if a storm is building or dissipating. In a building storm,
Started
discharge points reappear faster and in larger numbers. In a dissipating storm
Xpdr Ctrl discharge points appear slower and in smaller numbers.
Com/Nav
FPL
Direct-To
NOTE: When Heading is not available (N/A), the pilot must clear the strikes
after each turn.
Proc
11.2.3
Wpt Info
The Lightning Page displays either a 360° or a 120° viewing angle.
Map
Traffic
Terrain
Weather
Nearest
Services/
Music
Utilities
System
NOTE: Cell mode uses a clustering program to identify clusters of electrical
activity that indicate cells. Cell mode is most useful during periods of heavy
Messages
storm activity. Displaying cell data during these periods frees the user
from sifting through a screen full of discharge points and helps to better
Symbols
determine where the storm cells are located.
Appendix
Index
11-30
Clearing the StormScope
1. While viewing the Weather StormScope page, touch MENU.
2. Touch the Clear Strikes key to clear lightning strikes.
Changing the StormScope
1. While viewing the Weather StormScope page, touch MENU.
2. Touch the 360° or Arc to select the display view.
Figure 11-45 StormScope 360º and Arc Display Views
Garmin GTN 625/635/650 Pilot's Guide
Page
®
Display View
®
190-01004-03 Rev. F