Garmin GTN 625 Pilot's Manual page 137

2. The Lat/Lon coordinate values will be highlighted. Touch the
Lat or Lon key to toggle selection of the hemisphere values
and highlight the selected value. The Large knob may also be
used for cursor movement and characters selected with the
Small knob. Use the Large knob to backspace or move the
cursor to the left.
When The Lat Key Is Touched, The Latitude
Hemisphere Value Is Active For Selection
Touch to Select
Hemisphere Value
Figure 7-24 Waypoint Info - Set Lat/Lon Coordinates
3. Touch the desired hemisphere keys to select the desired values.
After selecting the hemisphere value, the cursor will advance to
the first character of the adjacent numeric value for selection.
Even when the hemisphere values are highlighted, touching
a valid numeric key will always place the cursor at the first
numeric value. The Large knob may also be used for cursor
movement and characters are selected with the Small knob.
NOTE: When editing values, turn the Large knob counter-clockwise to
backspace or move the cursor to the left.
4. As each value is selected, the cursor will advance to the next
character. Touch the necessary key for the desired values.
5. When finished with the Lat/Lon selections, touch the Enter
key.
6. When finished with all selections, touch the Back and then
the Create key to create the new waypoint.
190-01004-03 Rev. F Garmin GTN 625/635/650 Pilot's Guide
Touch To Toggle
Lat/Lon Selection
Touch to Select
Lat/Lon Coordinates
7-17
Foreword
Getting
Started
Xpdr Ctrl
Com/Nav
FPL
Direct-To
Proc
Wpt Info
Map
Traffic
Terrain
Weather
Nearest
Services/
Music
Utilities
System
Messages
Symbols
Appendix
Index