Creating (or Editing) a Flight Plan in Pan Mode
NOTE: It is not possible to graphically add an intermediate waypoint between
the current position and a direct-to waypoint unless that waypoint is in the
flight plan. Garmin recommends deleting any flight plan prior to graphically
editing a direct-to waypoint.
While in Pan Mode, touch the Graphically Edit FPL key to add/remove
waypoints and/or alter a course line in an existing flight plan. You can also enter
or edit an existing flight plan by touching the Flight Plan key on the home page.
See the Flight Plan section of this guide.
On the Map page, enter Pan Mode by touching the screen. Touch the
Graphically Edit FPL key. Touch any waypoint that you want to be part of
your flight plan. You also can touch and drag a flight plan line to a waypoint.
Should you make an error, touch the Undo key. The Undo key will reverse up
to the last nine consecutive edits. When finished, touch the Done key to save
your changes. Touch Cancel to leave the page without making any changes
to the flight plan.
Touch to leave the page
without changes to the
flight plan.
10
Edit Flight Plan
Undo
Key
Flight Plan on Map Page
GTN 625/635/650 Cockpit Reference Guide (CRG)
Touch to confirm the
entries into the flight plan.
190-01004-04 Rev. G