Load Procedures - Garmin GTN 625 Pilot's Manual

4.2.1.5
Foreword
The Load Procedure selection from the Waypoint Options will start the
Getting
Procedures function. See the Procedures section for complete information.
Started
Xpdr Ctrl
Com/Nav
FPL
Direct-To
Proc
Wpt Info
Map
NOTE: For some procedures, due to very small position differences in the
database, consecutive flight plan legs do not match up. The total effect
Traffic
on navigational guidance is negligible. The LOC BC 13 at KSLE via UBG
shown below is an example of this.
Terrain
Weather
Nearest
Procedure Flight Plan
Services/
Music
Utilities
System
Messages
Symbols
Appendix
Index
4-8

Load Procedures

1. On the Active Flight Plan page, touch the desired waypoint in
the flight plan. The Waypoint Options list will be displayed.
2. Touch the Load Procedures key to go to the Procedure
function for adding procedures to the selected flight plan.
Figure 4-15 Load Procedures Wpt Option
Leg Discrepancy
Figure 4-16 Procedure Flight Plan Leg Position Difference
Garmin GTN 625/635/650 Pilot's Guide
Touch to Select a Departure
Touch to Select an Arrival
Touch to Select an Approach
190-01004-03 Rev. F