Ads-B Status; Tcas Status; Test - Garmin GTN 625 Pilot's Manual

NOTE: Color of basic and proximate traffic is dependent on configuration
Foreword
(cyan or white) and airborne/on-ground status of target (target is brown
when on the ground, see the surface vehicles).
Getting
Started
9.5.1.1
Xpdr Ctrl
ADS-B Status displays the current status of traffic application: Off, Surface,
or Airborne.
Com/Nav
FPL
Direct-To
9.5.1.2
This shows the current status of the TCAS system. The modes reported by
Proc
the traffic device are "Operate" while in the air and "Standby" while on the
ground. This control allows the pilot to manually select the TCAS Status.
Wpt Info
Map
Traffic
9.5.1.3
The Traffic Test function is only available on some TAS traffic systems. The
Terrain
aircraft must be on the ground and Traffic Status must be in Standby.
Weather
Nearest
Services/
Music
Utilities
System
Messages
Symbols
Appendix
Index
9-20

ADS-B Status

Touch the ADS-B Status key to toggle the ADS-B Status.

TCAS Status

Touch the TCAS Status key to toggle the TCAS Status.

Test

1. Touch the Test key to activate the test function in the Traffic
equipment.
2. The unit will return to normal operation mode after the test
process is successfully completed.
Garmin GTN 625/635/650 Pilot's Guide 190-01004-03 Rev. F