Target Altitude; Altitude Type - Garmin GTN 625 Pilot's Manual

Hide thumbs Also See for GTN 625:

Table of Contents

Target Altitude

This sets the desired ending altitude for the VCALC setup.

1. While viewing the VCALC page, touch Target ALT.

2. Use the numeric keypad to select the desired Target Altitude

and then touch the Enter key.

This value selects the altitude reference that will be used for VCALC

calculations.

1. While viewing the VCALC page, touch Altitude Type.

2. Touching the Altitude Type key will toggle between MSL and

Above WPT. "Above WPT" is only available for waypoints that

are airports.

190-01004-03 Rev. F

Figure 14-6 Select VCALC Target Altitude

Garmin GTN 625/635/650 Pilot's Guide

Touch Enter Or

Press Small Knob

To Save Number

Show Quick Links

Table of Contents

Gtn 635 Gtn 650