Garmin GTN 625 Pilot's Manual page 392

Selected
Foreword
Heading Value
Getting
Started
Touch To Cancel
Xpdr Ctrl
Selection
Com/Nav
FPL
14.7
Direct-To
The Clean Screen mode makes the touchscreen inactive so the display can
Proc
be manually cleaned. The front bezel, keypad, and display can be cleaned with
a microfiber cloth or with a soft cotton cloth dampened with clean water. DO
Wpt Info
NOT use any chemical cleaning agents. Care should be taken to avoid scratching
the surface of the display.
Map
Traffic
Terrain
Weather
Touch To Clean Screen
Nearest
Services/
Music
Utilities
System
Messages
Symbols
Appendix
Index
14-26
Figure 14-46 Select Heading Value
7. Touch the Ground Speed key and then the keypad to select
the average ground speed for the trip and then touch Enter.
Clean Screen Mode
1. While viewing the Utilities page group, touch the Clean
Screen key to start Screen Cleaning Mode.
Figure 14-47 Utilities Home Page
2. Touch the HOME key to exit Screen Cleaning Mode.
Figure 14-48 Screen Cleaning Mode
Garmin GTN 625/635/650 Pilot's Guide
Touch To Clear
Values
Touch To Select
Heading Value
190-01004-03 Rev. F