Vertical Speed (Vs) Profile - Garmin GTN 625 Pilot's Manual

Hide thumbs Also See for GTN 625:

Table of Contents

Vertical Speed (VS) Profile

This value sets the vertical speed.

1. While viewing the VCALC page, touch the VS Profile key.

2. Use the numeric keypad to select the desired Vertical Speed

and then touch the Enter key.

Target Offset

The Target Offset is a pilot-selected distance value that represents the

geographical location where you wish to arrive at the target altitude. This

distance is measured from the Target Waypoint and, in a separate data field on

the VCALC page, designated as either before or after the Target Waypoint.

1. While viewing the VCALC page, touch the Offset key.

2. Use the numeric keypad to select the desired Target Offset and

then touch the Enter key.

190-01004-03 Rev. P

Figure 14-7 Select VCALC Vertical Speed

Figure 14-8 Select VCALC Target Offset

GTN 625/635/650 Pilot's Guide

Touch Enter or

Press Small Knob

to Save Value

or Press Small

Knob to Save

Show Quick Links

Table of Contents

Gtn 635 Gtn 650