Vertical Speed Mode (Vs) - Garmin Beechcraft A36 Pilot's Manual

VERTICAL SPEED MODE (VS)

In Vertical Speed Mode, the flight director acquires and maintains a Vertical Speed Reference. Current aircraft
vertical speed (to the nearest 100 fpm) becomes the Vertical Speed Reference at the moment of Vertical Speed
Mode activation. This mode may be used for climb or descent to the Selected Altitude (shown above the
Altimeter) since Selected Altitude Capture Mode is automatically armed when Vertical Speed Mode is selected.
When Vertical Speed Mode is activated by pressing the VS Key, 'VS' is annunciated in green in the AFCS Status
Box along with the Vertical Speed Reference. The Vertical Speed Reference is also displayed above the Vertical
Speed Indicator. A Vertical Speed Reference Bug corresponding to the Vertical Speed Reference is shown on
the indicator.
CHANGING THE VERTICAL SPEED REFERENCE
The Vertical Speed Reference (shown both in the AFCS Status Box and above the Vertical Speed Indicator)
may be changed by:
• Using the NOSE UP/NOSE DN Keys
• Pressing the CWS Switch, hand-flying the aircraft to attain a new Vertical Speed Reference, then releasing
the CWS Switch
If the Selected Altitude is reached during CWS maneuvering, the Altitude Reference is not changed.
NOTE:
To adjust the Altitude Reference in this case, the CWS Switch must be pressed again after the Selected
Altitude is reached.
Command
Bars Indicate
Climb to Attain
Vertical Speed
Reference
190-00595-01 Rev. B
Vertical Speed
Mode Active
Figure 7-8 Vertical Speed Hold Mode
Garmin G1000 Pilot's Guide for the Beechcraft A36/G36
AUTOMATIC FLIGHT CONTROL SYSTEM
Vertical Selected
Speed Altitude Capture
Reference Mode Armed
Selected
Altitude
Vertical
Speed
Reference
Vertical
Speed
Reference
Bug
339