Table of Contents
Advertisement
Turn the temperature control knob to COOL.
2.
Press the A/C button. The indicator light on the A/C button
3.
will illuminate.
The air intake selector button may be in the outside air
4.
mode or the recirculated air mode. The recirculated air mode
is recommended for best A/C performance when the vehicle
interior is very warm. As interior air comfort is reached, you
may decide to switch to the outside air mode.
Turn the fan speed knob to the position of your choice.
5.
If your vehicle is equipped with the rear passenger
6.
compartment air conditioning unit, it will be on when the
front A/C is on and the rear climate control lever is set to
REAR, 1, 2, 3, or 4. Refer to the previous section for an
explanation of the heating system.
Adjust your instrument panel registers.
7.
If the inside of your vehicle is very warm, you may want to
8.
drive for a few minutes with the windows down and the air
conditioner on. This forces most of the hot, stale air out of
the vehicle and allows the air conditioner to cool down the
interior more quickly.
The air conditioner may be used to cool the outside air being
drawn into your vehicle, but using recirculated air is more
economical and cools your vehicle more quickly.
NOTE: The A/C button independently toggles the A/C
system's compressor signal and indicator light ON and
OFF in the Panel, Panel/Floor, Floor, Defrost and Mix
functions. The A/C button will not operate or light
when the system is set in the OFF position. The A/C
button will operate in defrost but will not override
previously discussed automatic operation.
98
Advertisement
Table of Contents
