Table of Contents
Advertisement
Use the fuse puller tool to remove the blown fuse and
4.
replace the fuse with one that has the right amperage rating
(see the fuse panel cover for amperage ratings).
Always replace a fuse with one that has the specified
amperage rating. Using a fuse with a higher amperage
rating can cause severe wire damage and could start a
fire.
Put the fuse panel cover back on.
5.
Even after you replace a fuse, it will continue to blow if you do
not find what caused the overload. If the fuse continues to
blow, have your electrical system checked.
The following chart indicates the colors and amperage ratings of
standard fuses.
Servicing Your Villager
WARNING
343
Advertisement
Table of Contents
